How to Replace a Bathroom Sink Faucet

Bathroom faucet and sink

Whether your https://www.nivito.com.au/ has been broken for years or you're looking for a quick fix, there are some easy steps to follow to get the job done. The first step is to remove the existing faucet. If it's a single handle faucet, simply unscrew the screw to release it. Once free, you can remove the nut by unscrewing it with a screwdriver. Be sure to replace all of the supply lines before you install a new one, as this will prevent leaks in the future. Connect the hot and cold pipes together and tighten them with a wrench. You don't want to over tighten them as that may cause them to leak, so you need to make sure they are both secure.

Bathroom tap and washbasin

Use plumber's putty

You can use two adjustable wrenches to remove the old faucet. To keep yourself safe, it's a good idea to use plumber's putty to clean the faucet parts. Using gloves is a good idea, as mineral spirits can cause skin irritation and should be avoided at all costs. To attach the new faucet, you must first turn off the water supply. This will prevent you from leaking water into the pipes.

Reconnect the new one

After removing the old faucet, you can reconnect the new one. You'll need to disconnect the pipes that serve the pop-up drain. Next, you'll need to remove the supply tubes that serve the faucet. Typically, these supply tubes connect to the faucet's pop-up assembly. Once this is removed, you can simply lift the faucet out of the basin. To make sure that the new faucet has the correct fit, follow the instructions to the letter.

bathroom design

Disconnect the water supply

To start replacing a bathroom sink faucet, you'll need to disconnect the water supply to the sink. To do this, you'll need a basin wrench or socket wrench. You may need to secure the faucet retaining nuts under the sink with a pair of pliers. Afterwards, you'll need to unscrew the drainpipe. While you're unfastening the drainpipe, you can check for leaks in the pipes or drain.

Check the area wheather clean or not

Ensure the area is clean and dry before removing the faucet. If it's a pop-up drain, you may have to unscrew a p-trap nut. A p-trap is a gooseneck-shaped pipe that connects the sink to the drain. Separate the nut with a wrench or your fingers. Now you'll need to remove the flange that holds the faucet to the sink.

Bathroom tap and washbasin

Before removing the faucet, you'll need to disconnect the water supply. Usually, the faucet comes with everything except for the lines. However, you'll need to purchase a basin wrench separately to separate the supply tubes. Afterward, you can lift the faucet out by separating it from the escutcheon ring. Then, you'll need to remove the old pop-up assembly.